Loading ...
Step 2) Spin the motor head so the gas tank is up or if you have a propane make sure you rotate to the direction that the
manufacture recommends.
Step 3) Clamp down the auger with the J hook and toggle (D and G). You will see two nuts on the Adjustable Auger Hook.
If you are gripping a smaller diameter shaft, take the free spinning nut off and use only the lock nut.
Step 4) After the motor head is where you want it and the clamp is fully engaged on the auger shaft you can now decide
where you want the motor head bracket (B) to be placed in order to support the motor. Place the motor head bracket
(B) underneath where you want it to hold the motor and use the two self-tapping screws (F) to fasten the motor head
bracket to the U frame.
Step 5) After the motor head bracket (B) is fastened you can attach the self-adhesive pad (C) to the top of the motor
head bracket. This will give you some padding and also prevent any vibration between your auger and the bracket.
Loading ...
Loading ...