Loading ...
Loading ...
Loading ...
— 15 —
Installation
The electrode of the electronic ignition system is positioned above the surface of the burner base. Do not remove a burner
cap or touch the electrode of a burner while another is turned on. Damage or electrical shock may occur.
STEP 7
Assembling the Burners
u
Place burner heads over the burner base. Make sure
the hole in the burner head is properly aligned with
the electrode in the burner base (see Figure 11).
v
Place the burner caps on the burner heads. Make
sure that the burner caps are properly seated on the
burner head (see Figure 12).
w
Operation of the electric igniters should be tested
after the cooktop and supply line have been
carefully checked for leaks and the cooktop has
been connected to the electrical power. To check
igniters, push and turn a burner valve to the LITE
position. All spark igniters will make a series of
sparks (ticking sounds), but only the burner turned
to LITE will light.
Figure 11
Figure 12
PROPERLY SEATED NOT PROPERLY SEATED
Loading ...
Loading ...
Loading ...