Loading ...
Loading ...
Loading ...
ENGLISH
5
Fig. E
10
3
HNVC215B/HNVC220B
HNVC220BCZ00W
Fig. F
11
12
Bag filter and pre-filter (Fig. G, H)
HNVC220BCZ00W
The bag filter and pre‑filter can be separated to allow for
better cleaning.
Twist the bag filter to separate it from the pre‑filter.
Fig. G
Fig. H
12
11
Cleaning the dust bowl and filter
The dust bowl and filter can be washed in warm soapy
water.
1. Make sure the filters and the dust bowl
3
are dry before
installing.
Accessories (Fig. I)
Your hand vac may be supplied with some of the following
accessories:
- A brush tool
5
for furniture and stairs.
1. A crevice tool
13
is built into the dust bowl and can be
extended as shown in Figure I by pulling the extension
piece until it locks into position.
2. To store the crevice tool, press the release button
14
and push the crevice tool
13
into the dust bowl as
shown in Figure I.
D
Fig. I
13
14
Fitting (Fig. J)
1. Insert the appropriate accessory into the front of the
dust bowl
4
as show in Figure J.
2. Make sure the accessory is fully pushed in.
Fig. J
4
7
Replacing the filters
The filters should be replaced every 6 to 9 months and
whenever worn or damaged. Replacement filters are
available from your BLACK+DECKERdealer.
Visit www.blackanddecker.com to locatedealers.
• Remove the old filters as describedin Cleaning theFilters.
• Fit the new filters as describedin Cleaning the Filters.
(cat. no: HNVCF10)
These fit all units. When these filters reach the end of their
lifespan they must be disposed of at a local recyclingcenter.
MAINTENANCE
Use only mild soap and damp cloth to clean the vac. Never
let any liquid get inside the vac; never immerse any part of
the vac into aliquid.
WARNING: Make sure the vacuum is
completely dry before usingit.
IMPORTANT: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
Loading ...
Loading ...
Loading ...