LG Electronics LRG30355SB LG gas range

User Manual - Page 12

For LRG30355SB.

PDF File Manual, 55 pages, Download pdf file

Loading ...
Loading ...
Loading ...
USING THE OVEN Power Outage
%1:,11i_!_i
ii_'C! iii
..............................ill!;
To avoid possible burns, place the shelves in the desired
position before you turn the oven on.
Before you begin...
The shelves have stop-locks, so
that when placed correctly on
the shelf supports (A through
E), they will stop before coming
completely out, and will not tilt.
When placing and removing
cookware, pull the shelf out to
the bump on the shelf support.
To remove a shelf, pull it
toward you, tilt the f¥ont end up
and pull it out.
To replace, place the end of
the shelf (stop-locks) on the
support, tilt up the front and
push the shelf in.
_g!'l!: The shelf is not designed to slide out at the special low
shelf (R) position.
The oven has 6 shelf
positions.
It also has aspecial low
shelf position (R)for extra
large items, such as a large
turkey.
Oven Vent
Your oven is vented through
ducts at the rear of the range.
Do not block these ducts when
cooking in the oven-it is
important that the flow of hot
air from the oven and fresh air
to the oven burner be
uninterrupted. Avoid touching
the vent openings or nearby
surfaces during oven or broiler
operation-they may become
hot.
Handles of pots and pans on
the cooktop may become hot if
left too close to the vent.
i i
-
Plastic items on the cooktop
may melt if left too close to
the vent.
Vent appearance and
location vary.
Do not leave plastic or flammable items on the cooktop-
they may melt or ignite if left too close to the vent.
Do not leave closed containers on the cooktop. The
pressure in closed containers may increase, which may
cause them to burst.
Metal items will become very hot if they are left on the
cooktop, and could cause burns.
The oven or broiler cannot be lit during a power failure. Gas
will not flow unless the glow bar is hot.
If the oven is in use when a power failure occurs, the oven
burner shuts off and cannot be re-lit until power is restored.
This is because the flow of gas is automatically stopped and
will not resume when power is restored until the glow bar
has reached operating temperature.
Oven Light
Touch the OVEN LIGHT pad on the control panel to turn
the light on or off:
- 12-
Loading ...
Loading ...
Loading ...