Loading ...
Loading ...
Loading ...
English 6
Maintenance
Maintenance The following maintenance procedures can be performed without the aid of aser-
vicer.Always contact a servicer for otherrepairs.
Lights Use a 12V halogen bulb (max. 20Watt) with atwo pin,G4 base.
NOTE: Turn off the lights and fan and allow lights to cool before handling. If lights
do not operate upon installation, check for proper insertion.
CAUTION: TURN POWER OFF AT BREAKER BEFORE REMOV-
ING A DAMAGED BULB. DO NOT TOUCH THE BULBS IMMEDI-
ATELY AFTER USE. THE BULBS WILL REMAIN HOT FOR
SEVERAL MINUTES.
Light Bulb Replacement Note: DO NOT touch a new halogen bulb with your fingertips. Grasp the bulb
through a clean paper towel or facial tissue. The oils from yourskin can reduce
the longevity of the bulb.
Use a small flathead screwdriver (or yourfingernail) to remove the lens.
Pull damaged bulb straightout from the socket to remove. Press pins in bulb base
straight into socket until fully seated. Snaplens back into place.
Do not use cooktop while hood is disassembled, to ensureadequate ventilation.
Figure 4: Light Bulb Replacement
Loading ...
Loading ...
Loading ...