Loading ...
Loading ...
Loading ...
4 BISSELL.ca
Wet Cleaning
Positioning the Machine Correctly
To prevent leaking, ensure machine is always in a horizontal or upright position.
Correct Positions
Incorrect Positions
Overview
1. Spray Nozzle
2. Charging Port
3. Removable Suction Lens
4. Deep Cleaner Attachment
Release Latch
5. Dirty Water Tank
6. Removable Scrub Brush
7. Formula Tank
8. Control Panel
a. Power Switch
b. Battery Status Indicator Light
c. Spray Switch
3
4
7
5
6
1
2
a
b
c
8
IMPORTANT: Check the manufacturer’s tag before cleaning upholstery. “W” or “WS” on the tag means you can use your Pet Stain
Eraser™. If tag is coded with an “S” (with diagonal strike-through), or says “Dry Clean Only,” do not proceed. If manufacturer’s tag
is missing or not coded, check with your furniture dealer.
WARNING Keep spray away from face. Failure to do so may result in personal injury.
BISSELL.ca 5
Installing the Deep Cleaning Attachment
1. Make sure machine is OFF. Remove the dry
vacuum attachment. Squeeze latches and pull
to remove.
2. Press deep cleaner attachment back until it
clicks into place.
Spot Cleaning Carpet & Upholstery
1. Flip formula tank cap to
open and add formula. Click
cap back into place.
2. Turn machine ON by
pressing power button.
3. Tilt machine forward towards
stain and press spray button to
dispense formula.
Suction
Channel
4. Scrub area with brush,
keeping nozzle flat on surface,
as shown.
Tip: Turn machine off while
scrubbing to allow formula to
treat the stain.
5. For maximum suction, firmly
press suction channel down on
surface.
Note: Area may be damp to
touch after cleaning.
6. Empty dirty water tank
before water reaches “MAX
FULL” line.
CONTINUED ON NEXT PAGE
NOTICE Use of cleaning formulas which contain lemon or pine oil may damage this appliance. Chemical spot cleaners
or solvent-based soil removers also should not be used. These products may react with the plastic materials used in your cleaner,
causing cracking or pitting.
Wet Cleaning (continued)
Loading ...
Loading ...
Loading ...