Loading ...
Loading ...
Loading ...
4
USING THE TWIST-UP EYECUP AND SLIDING SUN SHADE
If you are not wearing glasses, twist the rubber eyecup (A) counter-clockwise to extend it. If you experience glare or lens fl are
due to the angle and direction of the sun relative to the front lens, pull the sun shade (F) out to extend it. (Note: sun shade is
fi xed on the 15-45x50mm model and cannot be extended).
USING THE TRIPOD
First, fold open the mini tripod’s legs and place it on a sturdy, level surface. Attach the spotting scope to the included mini
tripod by turning the mounting screw on the top of the tripod clockwise into the socket on the base of the scope until it is
securely attached (but do not overtighten). The socket on the base is a standard size (1/4”-20 thread), so any tripod of any
size may also be used with this scope.
USING THE TRIPOD PAN ARM
To tilt or pan the scope, rst loosen the head of the tripod by twisting the tripod’s pan arm handle (see below) counter-
clockwise, move the scope into the desired position, then tighten the tripod head by twisting the handle in a clockwise
direction.
CLEANING AND GENERAL CARE
The lenses of your Tasco spotting scope are fully coated for highest light transmission. As with any coated optics, special care
must be taken in cleaning the lenses. Follow these tips for proper lens cleaning:
• Blow away any dust or debris on the lens (or use a soft lens brush).
• To remove dirt or nger prints, clean with the supplied micro- ber cloth rubbing in a circular motion. Use of a coarse
cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. The included
washable micro ber cleaning cloth is ideal for the routine cleaning of your optics. Simply breathe lightly on the lens to
provide a slight amount of moisture, then gently rub the lens with the micro ber cloth.
• For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fl uid or isopropyl alcohol
may be used. Always apply the fl uid to the cleaning cloth – never directly on the lens.
Never disassemble your spotting scope. Irreparable damage can result from unauthorized service attempts, which also void
the warranty.
Note: appearance and features
of tripod are subject to change.
Note: appearance and features
Pan Arm Handle
Mounting Screw
Mini Tripod
Loading ...
Loading ...
Loading ...