Loading ...
Loading ...
Loading ...
PROBLEM POSSIBLE CAUSE SOLUTION
The power
cord cannot be
retracted.
The power cord is stuck. Release the power cord and retract it again.
The cord is being winded in the
wrong direction.
Wind in the direction the arrow is pointing.
Retract the power cord too fast. Retract the power cord slowly.
Reduced
efficiency and
motor/speed
vibration.
Dust bag is full. Replace the dust bag.
Suction nozzle, hose, or tank inlet
is blocked.
Check the suction nozzle, hose, and tank inlet
for obstructions.
The pre-filter or air inlet filter
needs to be cleaned.
Check and clean the pre-filter and air inlet
filter. Replace if damaged.
The accessories such as hose, floor
nozzle and extension wand or the
powerhead are not installed into
place, causing air leakage.
Install each part correctly.
TROUBLESHOOTING
- 15 -
Loading ...