Loading ...
Loading ...
Loading ...
PROBLEM POSSIBLE CAUSE SOLUTION
The dry vacuum
will not operate.
The socket is damaged. Check if the socket has power.
The plug is not plugged into the
wall outlet tightly.
Insert the plug into the power source and
press the on/off switch button.
Power button in the wrong
position.
Press the power button on the powerhead.
Motor overheating protection
during use.
Unplug the plug, check whether the dust bag
is full and the pre-filter or exhaust filter is
locked. Replace the dust bag or clean up the
pre-filter or exhaust filter, wait for the motor
to cool enough about 50 minutes before
restarting it for use.
Functional fault in the power
cord, power button, or motor.
Have the damaged part checked by
qualified personnel or call 1-877-531-7321
(US) / 1-844-608-3081 (CA) for assistance.
The dust comes
out from the
motor cover.
The exhaust filter is missing,
damaged or not fully installed.
Ensure the exhaust filter is correctly installed
or replace it if damaged.
The pre-filter is missing or
damaged.
Ensure the pre-filter is correctly installed or
replace if damaged.
The air inlet filter is missing or
damaged.
Ensure the air inlet filter is correctly installed or
replace if damaged.
Repairs for this vacuum should be performed only by qualified service personnel using
only identical replacement parts.
REPAIRS
- 14 -
Review this table to find do-it-yourself solutions for minor performance problems. Any
service needed, other than maintenance described in this Use & Care Guide, should be
performed by a qualified service agent.
TROUBLESHOOTING
WARNING
Always turn off and unplug vacuum cleaner before performing maintenance to the
vacuum cleaner. Failure to do so could result in electrical shock or personal injury.
Loading ...
Loading ...