Loading ...
Loading ...
Loading ...
ProgrammingthePlayingOrderoftheTracks
-- ProgramPlay
You can arrange the order in which tracks play before you
start playing, You can program up to 32 tracks.
• To use Repeat play (see page 16) for Program play, press
REPEAT after starting Program play,
• There is a time limit in doing the following slops, if the
setting is canceled before you finish, start from step 2
again.
1Load CDs.
• if the current playing source is not the CD player, press
CO _-/ll, then • before going to the next step.
2 Press PROGRAM so that
"PROGRAM" appears on the
display.
The PRGM (program) indicator also lights up on the
display.
• Ifa program has been stored in memory, the program is
called up,
3 Press one of the disc number
buttons (CDI, CD2, and
CD3) to select the disc
number you want to play.
Track number
Discnumber
4 Select a track from the CD
selected in the above step.
On the unit:
Turn I_1 / l_ll_l to select the
track number and press
SET/DISPLAY.
On the remote control:
Press the number buttons.
• For how to use the number butlons,
see "To go to another track directly
using the number buttons" on page 14.
Program step number
E 13
4 5 B
7 B fl
CD
5 Program other tracks you want.
• To program tracks from the same disc, repeat step 4.
• To program tracks from a different disc, repeat steps 3
and 4.
I'l
O Press CD li_/ll.
The tracks are played in the order you
haxe programed.
To stop playing, press 1.
To exit from Program play mode, press PROGRAM again
before or afterplay, The PRGM (program) indicator goes off',
The program you ha_e made is stored in memory,
d¢
• If you try to program the 33rd track
"FULL" will appear on the display
• If your entry is ignored
You have tried to program a track from an empty tray, or a track
number that does not exist on the CD (for example, selecting track
14 on a CD that only has 12 tracks). Such entries are ignored.
• If the total playing time is 100 minutes or more
".... : ...2' will appear on the display.
Tochecktheprogramcontents
Before playing, you can check the
program conlents by pressing _ or 1_4
on the remote control.
• _ : Shows the programed tracks in
the programed order.
• I..I1_: Shows them in the reverse order,
0%
Tomodifythe program
Before or after playing, you can erase the last
programed tracks by pressing
CANCEL/DEMO,
• Each time you press the button, the programed
track shown on the display is erased from the
program,
• Ejecting a CD will also erase the track numbers
programmed from the ejecled CD,
To add tracks in the program before playing, simply select
the track numbers you want to add by following step 4 of the
programming procedure on page 15.
To erase the entire program before or after playing, press
1. "PROGRAM" appears on the display.
The program you have made will be erased, when
• You eject all the CDs.
• You unplug the AC power cord.
• A power failure occurs,
-15-
Loading ...
Loading ...
Loading ...