PH1420 OPERATOR'S MANUAL

Loading ...

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC 19

MOUNTING AND ADJUSTING THE

QUICK-ADJUST FRONT HANDLE

WARNING:

Always remove the

battery pack from the product when you

are assembling parts, making adjustments,

cleaning, or when the product is not in use.

1. Stop the motor and remove the

battery pack, if installed.

2. Loosen and remove the quick-

release lever and wing nut from the

front handle (Fig. 3a).

3. Push the front handle onto the shaft

within the mounting zone between

the threshold ring and the coupler

on the power-head shaft (Fig. 3b).

4. Insert the clamping block into the

handle slot (Fig. 3c).

5. Mount the quick-release lever and

tighten the wing nut. Make sure

that the front handle is positioned

upwards and points toward the top

of the rear handle (Fig. 3d).

6. Pull the quick-release lever up to

move/rotate the front handle to a

comfortable operating position

(Fig. 3e).

Quick-release

Lever

Front Handle

Wing Nut

Clamping Block

Front Handle

Wing Nut

Quick-release Lever

Clamping Block

Threshold Ring

Coupler

Loading ...

EGO PH1420 POWER+ Power Head Tool Only