Loading ...
Loading ...
Loading ...
Usingtheoven.
The OVEN TEMPknob is located on the control panel on the front of the range.
OVEN ® TEMP
Oven TemperatureControl
To use the oven, simply mrn the knob
to the desired cooking temperatures,
which are marked in 25°F increments
on the dial. OVEN TEMP maintains the
teini)erature you set, ti'oin 200°1:t(> BROIL.
TheOvenCyc/i)_gbghtg/owsuntiltheoven
reachesyourselectedtemperature,thengoesoff
andonwith theovenunit(s)dun?)gcookl?)g.
Bump
Oven Shelves
The shelves are designed with stop-locks
so when placed correctly on the shelf
supports, they will stop beflwe confing
conq)lemly Otlt of the oven and will not
tilt when p)tl are removing fi)od ti'om
them or placing fi)od on them.
When plating cookware on a shelf, pull
the shelf out to the bunq) on the shelf
suI)port. Place the cookware on the
shelf, then slide the shelf back into the
()veil. This will eliminate reaching into
the hot ()veil.
Toremove the shelves from the oven, pull
tl_em toward you, tilt fl'ont end upward
and pull them ()tit.
Toreplace, place shelf oil shelf suI)port
with stoI>locLs (curved extension of
sheff) fitting up and toward back of oven.
Tilt up ti'ont and push shelf toward back
(ff ()veil until it goes past the lxunp on
the shelf sui)port. Then lower ti'ont of
sheff and push it all the way back.
k"
Theovenhas4shelfpositions.
OvenShelf Positions
The oven has fi)ur shelf supports_
(botton_), B, C and O (top).
Shelf positions fi)r cooking are suggested
oil Baking and Roasting pages.
Useof AluminumFoil
• H desired, a sheet oI _lhII/lintIIll
toil may be used on the floor of the
()veil trader the bake element.
Be certain foil does not touch bake
element Ahunimun fi)il used in this
way may slightly afli_ct the browning
of some foods. Change fi)il when it
becon/es soiled.
• DONOT place a sheet of almninun_
ff)il on the shelf. To do so may result
in iml)ropedy cooked fiiods, dan/age
to oven finish and increase in heat
on outside surtilces of the ()veil.
You may use altuninun_ fi)il to line the
broiler pan and broiler grid. HoweveI;
you must mold the fi)il tightly to the
grid and cut slits in itjust like the grid.
Loading ...
Loading ...
Loading ...