Loading ...
Loading ...
Loading ...
Unique Picture setting from SHARP (Continue)
Press " (TOOLS)".
Select "TV options" > "Picture" > "Advanced Settings".
Local Dimming
This feature can balances the backlight on the TV to make scene look darker or
lighter.
Off / Low / Middle / High
10-bit color Reproduction
Set color tones.
Off / Low / Middle / High
Motion Enhancement
Use Motion Enhancement to view fast-action video more clearly.
Effect / Demo Partition / Demo
Low Blue Light
Adjust the differences of blue light color of the TV.
Off / Low / Middle / High
*Automatic Playback Optimization
To optimize image quality based on content type when Dolby Vision content
changes.
Off / On
*Dolby Vision PQ Calibration
Select from the following available settings.
View Mode: The "View Mode" is updated based on "End User Calibration".
End User Calibration: You can set picture quality based on your preferences.
Last Modified Time: The last date of setting was modified.
*Light sense
Automatically adjust brightness based upon the changing ambient lighting
conditions.
Off / On
11-Point White Balance Correction
Adjust white balance to your preference.
Enable / Gain / Red / Green / Blue
AISR (AI Super Resolution)
When input a signal other than 4K, outline of picture can be emphasized according
to your preference.
Off / Low / Middle / High
*
NOTE
This feature only available when input signal is playing Dolby Vision content.
Input settings
PC Mode
Press " (TOOLS)".
Select "TV options" > "Picture" > "Advanced Settings" > "PC Mode".
Adjusts the picture when a PC is connected to the TV via HDMI.
Off / On
ALLM (Auto Low Latency Mode)
Press " (TOOLS)".
Select "TV options" > "Picture" > "Advanced Settings" > "ALLM".
To use "ALLM", you need to set the "HDMI EDID Version" to be "EDID 2.1".
Auto Low Latency Mode enables the ideal latency setting to automatically be set
allowing for smooth, lag-free and uninterrupted viewing and interactivity.
Off / On
HDMI RGB Range
Press " (TOOLS)".
Select "TV options" > "Picture" > "Advanced Settings" > "HDMI RGB
Range".
Sets the HDMI type for HDMI IN 1, 2, 3 and 4 terminals.
This feature provides picture color quality of HDMI input signal.
Auto / Full / Limit
HDMI EDID Version
Press " (TOOLS)".
Select "TV options" > "Settings" > "Channels & Input" > "Inputs" >
"Consumer Electronics Control (CEC)" > "HDMI EDID Version".
When you use device that supports Variable Refresh Rate (VRR) such as game
console, you need to set each HDMI input to be "EDID 2.1".
EDID 1.4 / EDID 2.0 / Auto EDID / EDID 2.1
Picture settings
EN 5-3
>><<
Loading ...
Loading ...
Loading ...