Loading ...
Loading ...
Loading ...
continued on next page
23
You MUST Review Your
Vehicle Owner’s Manual
Your vehicle owner’s manual will let
you know which vehicle belts and
seating positions child restraints
can be installed in.
1
Determine How the Child
Restraint Will Be Locked
Into Place
The vehicle belt must not loosen after
tightening. This means there needs to
be a way to lock the vehicle belt.
The ways this can be done are:
• By using the seat belt’s retractor (see step 3); OR
• By using the seat belt’s latch plate (see step 4).
2
3
Check the Retractor
Retractors pull seat belts into stored
positions and lock the belt to hold
passengers in place.
See the next page for some common
types of vehicle belt retractors that will
work with this child restraint.
24
Automatic Locking Retractor
Emergency Locking Retractor
This retractor always locks.
It will automatically lock after slowly pulling the seat belt out at
least halfway and letting the belt go back into the retractor an
inch or two.
If the retractor does not lock, it is most likely an Emergency
Locking Retractor. These retractors only lock during a sudden
stop or collision.
You will need to determine if your seat belt’s latch plate can lock
the belt. See Step 4, “Check the Latch Plates”.
See Step 4, “Check
the Latch Plates”.
Switchable Retractor
(most vehicles have this type)
This retractor can be switched to a locking mode.
You must have the retractor in the locking mode to use the seat
belt with this child restraint.
Switching to locking mode: Slowly pull the shoulder belt all the
way out, then let it go back in an inch or two.
As it goes back in, you will most likely hear a ratcheting sound.
Gently pull the belt to see if it has locked. You will not be able to pull
any more belt out if the lock has engaged.
Types of Retractors
Loading ...
Loading ...
Loading ...