Loading ...
Loading ...
Loading ...
Reclining the Car Seat
19
This car seat has 3 positions.
To Recline: Pull out on recline
handle and push top of child
restraint back.
For More Upright: Pull out on
recline handle and pull top of child
restraint forward.
The recline handle is at the front of
the car seat and under the pad.
Rear-Facing Mode
- 3 Reclined or 2 Semi-reclined
For children who cannot sit up unassisted, the level line on
shell must be parallel with the ground using either Position
3 or 2.
For children who can sit up unassisted, you may rotate the
child restraint to be more upright in Position 2.
Forward-Facing Mode - 1 Upright or 2 Semi-reclined*
Booster Seat Mode - 1 Upright or 2 Semi-reclined*
*
When used in Forward-Facing or Booster Seat mode, the
semi-reclined position is to be used only if necessary to install
the child restraint or booster seat fl ush against the vehicle seat
back. Vehicle seat back must be upright.
LATCH: Lower Anchor Use
20
Vehicle
Seat
Bight
Lower Anchor Bars
For Use in Rear-Facing
or Forward-Facing
Mode
Your vehicle’s features may be considerably different
than those pictured here.
The lower anchors of LATCH (Lower Anchors and Tethers for
CHildren) is a universal system for installing child restraints without
using vehicle seat belts.
The lower anchor can ONLY be used in vehicles that have the
lower anchor bars installed in designated seating positions. Most
vehicles manufactured after September 2002 are equipped with
lower anchor bars.
Check your vehicle owner’s manual to see which seating positions
may be equipped with LATCH: lower anchor bars.
WARNINGS
Do not use both the lower anchor belt and vehicle belt at the
same time.
When used correctly the lower anchor belt or vehicle belts
are equally safe.
continued on next page
Loading ...
Loading ...
Loading ...