Loading ...
Loading ...
Loading ...
8
For all hoods, except the 36” wide double blower hood, remove the adapter (1), or
adapter/damper, taped inside the hood.
NOTE: For 36” wide double blower hood, the adapter is
taped on top of the filters. Remove adapter and
set aside before removing filters.
A. Remove tape on filters.
Remove filters from hood and set aside.
NOTE: It is recommended to start with the
middle one(s).
B. Lift out grease drip rail (1) and set aside.
5. CHOOSE THE OPENING(S) (INTERNAL BLOWER(S) HOOD ONLY)
6. REMOVE THE FILTERS AND THE GREASE DRIP RAIL
7. REMOVE THE ADAPTER (INTERNAL BLOWER HOOD ONLY)
Remove the knockout(s) for the chosen opening(s) (horizontal at the back of the hood or vertical on top). See illustrations below.
VERTICAL DISCHARGE
HORIZONTAL DISCHARGE
Punch out the appropriate electrical knockout hole on
top (A) or back (B) of the hood. Install the wire clamp
(included in parts bag).
1
2 3
HR0021
1
2
3
HD0250
AB
HD0581
1
HD0578
AB
1
Loading ...
Loading ...
Loading ...