Loading ...
Loading ...
Loading ...
9
UPPER RACK
Load delicate and light
dishes:glasses, cups, saucers, low
salad bowls.
The upper rack has tip-up
supports which can be used in a
vertical position when arranging
tea/ dessert saucers or in a lower
position to load bowls and food
containers.
(loading example for the upper rack)
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable aps can be
positioned at three dierent heights to
optimize the arrangement of crockery
inside the rack.
Wine glasses can be placed safely in
the foldable aps by inserting the stem
of each glass into the corresponding
slots.
Depending on the model:
• to unfold the aps there is needed
to slide it up and rotate or release it
from the snaps and pull it down.
• to fold the aps there is needed to rotate it and slide aps down or
pull it up and attach aps to the snaps.
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adjusted:
high position to place bulky crockery in the
lower basket and low position to make the
most of the tip-up supports by creating more
space upwards and avoid collision with the
items loaded into lower rack.
The upper rack is equipped with a Upper
Rack height adjuster (see gure), without
pressing the levers, lift it up by simply holding
the rack sides, as soon as the rack is stable in
its upper position.
To restore to the lower position, press the levers A at the sides of the
rack and move the basket downwards.
We strongly recommend that you do not adjust the height of the
rack when it is loaded.
NEVER raise or lower the basket on one side only.
LOWER RACK
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids
should ideally be placed at the sides to avoid interferences with the
spray arm.
The lower rack has tip-up supports which can be used in a vertical
position when arranging plates or in a horizontal position (lower) to
load pans and salad bowls easily.
(loading example for the lower rack)
GLASS CARE
Dedicated accessory that
allows you to safely store
dierent types of stem
glasses in the lower rack.
It enables cleaning &
drying results by allowing
an optimised and stable
positioning of the glasses.
DYNAMIC CLEAN IN LOWER RACK
Dynamic Clean uses the special water
jets in the rear of cavity to wash more
intensively the high dirty items.
Placing the pots/casseroles faced to
the Dynamic Clean® component please
activate the DYNAMIC CLEAN on the
panel.
The lower rack has a Dynamic Clean, a special pull-out support in the
rear of the rack that can be used to support frying pans or baking pans
in upright position, thus taking up less space.
How to use Dynamic Clean:
1. Adjust the Dynamic Clean area
(G) folding down the rear plate
holders to load pots.
2. Load pots and casseroles inclined
vertically in Dynamic Clean area.
Pots have to be inclined towards
the power water jets.
2
3
1
1
3
2
A
B
Loading ...
Loading ...
Loading ...