Loading ...
Loading ...
Loading ...
10
Stubborn Dirt:
Clean the area with cleaning solvent first, prior to scrubbing.
CAUTION! DO NOT put cleaning solvent in to the clean water tank.
CAUTION! Ensure that the solvent is not harmful to the carpet before use. For the amount and
usage of the cleaning solvent, please read and follow the manufacturer’s instructions carefully.
DO NOT use diluents, aniline, chloroform and flammable solvents.
Recommended:
• Alkali ionized water
• Citric acid
• Hydrochloric acid water
• Not recommended:
• Neutral detergent for the kitchen
• Alkaline detergent
• Acid detergent
1. Apply the cleaning solvent to the carpet and rub the dirt with the brush to lift it up.
2. Spray the cleaning solvent with water and pull the water suction inlet backwards and forwards
across the stain in order to suck up the water, solvent and dirt.
3. Do not leave any solvent.
Safety Cut-off:
The motor is equipped with a thermal cut-out. If for any reason, the appliance should over-heat, the
thermostat will automatically turn the unit off. Should this occur:
1. Press the power switch and unplug the appliance from the electrical outlet.
2. Check for any blockages.
3. Clean the filters.
4. Allow the appliance to cool for approximately one hour.
5. Re-start the appliance; plug into an electrical outlet and switch back on.
Loading ...
Loading ...
Loading ...