Loading ...
Loading ...
Loading ...
Fahrenheit/Celsius
On/Off
Timer
Turbo Fan
Increase Temperature
Working Mode
CONTROL PANEL
Decrease Temperature
Operating Your Heater
HEAT CONTROL SWITCH
Check that the Power Switch on the side of the heater is set to the Off position
before plugging the heater in and turning on the mains supply. Turn the Power
Switch at the side of the heater to the “I” position. You will hear a beep.
CONTROL PANEL
Press the On/Off button on the Control Panel to turn the heater on.
The LCD will display the current room temperature and the set temperature.
Select the desired temperature by pressing the Increase or Decrease
Temperature buttons.
The heater operates between 5°C and 37°C. (The Working Mode button must be
pressed to display 1000W/1300W or 2300W to generate heat.) Please note:
Once the ‘room’ temperature is equal to or greater than the ‘set’ temperature,
the heater will stop generating heat.
Press the Working Mode button to select either 1000W, 1300W, 2300W or
Prevent Frost.
Prevent Frost is for cooler climates where the temperature may drop below 2°C.
Once this temperature is reached, if Prevent Frost is selected, the heater will start
generating heat until it reaches the Set Temperature at which time it will stop
generating heat.
Press the Turbo Fan button to increase heat output. The fan remains at the same
speed; only the element changes to create the greater/lesser heat output. Press
again to turn off.
Press the Fahrenheit/Celsius button to display the preferred temperature scale.
Loading ...
Loading ...
Loading ...