Loading ...
Loading ...
Loading ...
Before Use
10
Before Use
Use ordinary tap water. Distilled or demineralized water is recommended
if tap water is too hard. DO NOT add detergents, perfumes, oils, or other
chemical substances to the Boiler. The product warranty will be null and
void if anything other than water is added to the Boiler.
*IMPORTANT*
C. Filling Boiler with Water
WARNINGS:
• Carefully read all instructions before removing Boiler Cap.
• Always unplug appliance before fi lling the Boiler.
Follow these instructions to avoid overfi lling the Boiler:
• Be sure appliance is unplugged from the
electrical power outlet, and has cooled for
at least 5 minutes before fi lling with water.
• Make sure Handle Assembly is in the
upright “off” position. Remove Boiler Cap
by turning it counterclockwise.
• Pour in 600 mls of water using
the Measuring Cup and Filler
Funnel provided – fi ll cup to the
“200 ml” marking three times.
Be careful not to overfi ll the
Boiler. Please note that excess
water will be fl ushed out during
use if the Boiler is overfi lled,
resulting in wet fl oors.
• Replace Boiler Cap by turning it clockwise. Do not tighten
Boiler Cap too much – fi nger tightening is suffi cient to lock the
steam in the Boiler. If using cold water, heating time is about
3-5 minutes. If using warm water, heating time is reduced.
• Do not overfi ll the Boiler as excess water will be fl ushed out
of the Boiler before dry steam will emit.
• If re-fi lling the Boiler while Steamer has been in use, be sure
to allow Steamer to cool for at least 5 minutes and loosen
Boiler Cap slowly to allow any excess steam to escape
before completely removing Cap. (See page 12, “Refi lling
Boiler During Use” for detailed instructions.)
*IMPORTANT*
1
00 ml
200 ml
A
N
T
(
M
a
x
100 ml
200 ml
A
N
T
I
B
A
K
(
M
a
x
)
Loading ...
Loading ...
Loading ...