Loading ...
Loading ...
Loading ...
Follow Steps 11.
STEP-11：Finally，the barbecue is ready to be
installed into the cart. Once installed, secure
the barbecue head with 2pcs M5x12 screw
through the holes that are on each side,
towards the front, on the inside of the grill.
DRAW YOUR ATTENTION:
Note1：Mounting holes in the Bottom Back
Panel#5：①&② is for Tank Securing Strap
With Ring（#8）. ③ There is also four holes
that are for mounting the transformer（These
holes are only for BBQ HEAD WITH LIGHTS）.
Note2：Large Round holes in the Upper and
Bottom Back Panel
（#5 & #6）：④ is for LP
Hose; ⑤&⑥ are for transformer wire.
Note3
：Some adjustments may be needed to
obtain proper placement or level positioning
with the cart . Make sure to tighten all
screws with screwdriver.
Loading ...
Loading ...