Loading ...
Loading ...
Loading ...
APPLICATIONS
For charging the metabo HPT batteries types BSL14 series, BSL18 series, and MV series.
CHARGING METHOD
NOTE: Before plugging into the receptacle, make sure the following points.
○ The power source voltage is stated on the nameplate.
○ The cord is not damaged.
WARNING: Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
1. Connect the battery charger’s power cord to the receptacle.
When connecting the plug of the charger to a receptacle, the charge indicator lamp will
blink in red. (At 1-second intervals).
WARNING: Do not use the electrical cord if damaged.
Have it repaired immediately.
2. Insert the battery to the battery charger.
Insert the battery into the battery charger as
shown in Fig. 2.
Fig. 2
Charge
indicator lamp
Guide rail
Battery
8
English
000BookUC18YSL3USmetabo.indb8000BookUC18YSL3USmetabo.indb8 2018/06/0715:05:112018/06/0715:05:11
Loading ...
Loading ...
Loading ...