Loading ...
Loading ...
Loading ...
ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included allen wrenches, assembly requires a phillips screwdriver _, an adjustable
wrench _, and a rubber mallet _ .
As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.
The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on
page 14. The second number refers to the quantity used in assembly. Note: Some small parts may have been
pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.
M8 Nylon
Locknut (38)-4
M10 Nylon
Locknut (33)--6
M10 Split
Washer (45)-2
Handlebar
Washer (55)-2
M10
Washer (29)-2
Console
Screw (59)4 M8 x 19mm Button
Screw (56)-2
M10 x 27mm M10 x 27mm \"_
Patch Screw (40)-2 Carriage Bolt (27)-2 Spring Bracket
Washer (35)-2
f _ f I t jl
, J't
M8 x 45ram Button Bolt (50)-4 M10 Bolt Set (25)-2
M10 x 74mm Bolt (7)-2
M10 x 75mm Carriage Bolt (34)-4
1. Identify the Front Stabilizer (10), which has round
Endcaps (21) on it. While another person liftsthe front
of the Frame (1), attach the Front Stabilizer to the
Frame with two M10 x 75mm Carriage Bolts (34) and
two M10 Nylon Locknuts(33).
34
34
21
10 33
5
Loading ...
Loading ...
Loading ...