Tripp Lite PDUV15 Owner's Manual

Loading ...

PDUMV15 and

PDUV15

PDUV20 and PDUMV20

Installation

Zero U Rack Configuration.Attachthethreemountingclips

suppliedwiththePDUtotherackenclosureusingtheincluded

hardware.Themountingclipsshouldbeattachedalonga

verticalplaneatequidistantpointswhichroughlycorrespond

tothecenterandendsofthePDU.Theexactmounting

configurationmayvarydependingontherackandenclosure.If

possible,usepre-existingmountingpointswithinthe

enclosure.

Wall or Under-Counter Configuration.Attachthethree

mountingclipssuppliedwiththePDUtoawallorsimilarflat,

securesurfaceusingtheincludedhardware.Themounting

clipsshouldbeattachedalongaverticalorhorizontalplaneat

equidistantpointswhichroughlycorrespondtothecenterand

endsofthePDU.Ifpossible,usepre-existingmountingpoints.

WARNING: Do not attempt to mount the PDU with the

outlets facing downward; the mounting clips are not

designed to support the weight of the PDU in that manner.

Zero U Rack Configuration (Mounting Buttons). Attachthe

includedmountingbuttonstothePDU.PositionthePDUas

desiredintherackenclosure,alignthebuttonswiththerack

mountingslots,andslidethePDUintoposition.

Note: Regardless of configuration, the user must determine the

fitness of hardware and procedures before mounting. The PDU

and included hardware are designed for common rack and rack

enclosure types and may not be appropriate for all

applications.

Attach the PDU to the mounting clips.Usinganassistant,

placearearcornerofthePDUontheinsideedgeofthe

mountingclips,pivotthePDUtowardthealternateinsideedge

andsnapintoplace.

Attach the input plug of the PDU to a grounded outlet.

Inserttheplugdirectlyintoagroundedoutletthatdoesnot

shareacircuitwithaheavyelectricalload(suchasanair

conditionerorrefrigerator).

Attach equipment to the PDU.Donotexceedtheloadrating

ofthePDU.ThetotalelectricalcurrentusedbythePDUwill

bedisplayedonthedigitalmeterinamperes.

Optional Installation (Models PDUV20 & PDUMV20).The

PDUincludesanadapterthatconvertstheL5-20Pinputplug

toa5-20Pinputplug.Theadapterisoptional;thePDUwill

workproperlywithoutconnectingtheadapter.

14-02-334-933043.indd 2 3/26/2014 11:52:08 AM

Loading ...

Tripp Lite PDUV15 1.4kW Single-Phase 120V Basic PDU, 14 NEMA 5-15R Outlets, NEMA 5-15P Input, 15 ft. 4.57 m Cord, 0U Vertical

Owner's Manual - Page 2