Loading ...
Loading ...
Loading ...
20
1. Connect vent to exhaust outlet
2. Move dryer to final location
Using a 4" (102 mm) clamp, connect vent to exhaust outlet in
dryer. If connecting to existing vent, make sure vent is clean.
Dryer vent must fit over dryer exhaust outlet and inside exhaust
hood. Check that vent is secured to exhaust hood with a
4" (102 mm) clamp.
Move dryer to final location, taking care not to crush or kink vent
or flexible gas line.
After dryer is in place, remove corner posts and cardboard from
under dryer.
5. Attach long hose to dryer fill valve
and tighten coupling
Remove protective cap from water
inlet valve. Attach other end of long
hose to fill valve at bottom of dryer back panel. Screw on
coupling by hand until it is seated on fill valve connector.
Using pliers, tighten the couplings an additional 2/3 turn.
NOTE: Do not overtighten. Damage to the coupling can
result.
6. Turn on cold water faucet
Check that the water faucets are turned on.
7. Check for leaks
Check for leaks around “Y” connector, faucet, and hoses.
CONNECT VENT
Loading ...
Loading ...
Loading ...