Loading ...
Loading ...
Loading ...
29
INSTALLATION INSTRUCTIONS
ENGLISH
Cooktop Installation
1
Visually inspect the cooktop for damage. Make
sure all cooktop screws are tight (see below for
locations).
Screws
2
Carefully lower the cooktop into the counter- top
cutout, making sure not to trap any wires.
NOTE
Do not use caulking compound. The cooktop
must be removable, should service be required.
3
Install the retainer brackets to the bottom of the
cooktop; then snug the bolts against the bottom
of the countertop as shown.
NOTE
The retainer brackets MUST be installed to meet
local codes or, in their absence, with the National
Electrical Code ANSI/NFPA No. 70, latest edition.
Preferred installation
Retainer brackets
Cooktop
Bolt
Retainer brackets
Countertop
Alternative installation
(For Model: UPCE3064ST)
Retainer brackets
Front
Rear
Alternative installation
(For Model: UPCE3664ST)
Retainer brackets
Front
Rear
Final Check
Perform a final operational check of the cooktop,
making sure the cooktop powers on properly and that
each Cooking Zone operates correctly.
Refer to the Operating Instructions in this guide for
details.
Model and Serial Number Location
The model and serial numbers are located on a
plate on the bottom of the cooktop. Please record
them in this guide; you will need them for warranty
registration.
CAUTION
Do not touch cooktop glass or Cooking Zones.
They may be hot enough to cause burns.
Loading ...
Loading ...
Loading ...