LC 300 User Manual

Loading ...

H THE INFORMATION DISPLAY

The information display K not only serves as an indicator of the (set) time and

temperature (

Sections C, E, and F), it also indicates any malfunctioning of the

heater. The code on the information display tells you what is the matter:

CODE INFORMATION WHAT TO DO

e - 0 Temperature฀within฀the฀heater฀too฀high.฀Cool-down฀and฀re-ignite.

f - 0 Power฀interrupted.฀Re-ignite฀the฀heater.

e - 1฀Faulty฀thermostat.฀Contact฀your฀dealer.

f - 1 Faulty฀burner฀thermistor.฀Contact฀your฀dealer.

e - 2฀Starting฀problems.฀Contact฀your฀dealer.

e - 23

Re-ignite฀the฀heater฀immediately฀after฀

extinguishing.

Wait฀for฀approx.฀30฀sec.

and฀re-ignite฀after฀inserting฀

the plug again.

e - 5฀Tipping-over฀protection.฀Re-ignite฀the฀heater.

e - 6฀Poor฀burning.฀Contact฀your฀dealer.

e - 7 Room temperature If necessary,

฀above฀32°C.฀re-ignite฀the฀heater.

e - 8 Defective booster. Contact your dealer.

e - 8 1฀Abnormal฀frequency.฀Insert฀the฀plug฀into฀the฀wall-socket฀again.

Contact your dealer.

e - 9฀Air฀filter฀dirty;฀or฀Clean฀filter.฀

฀Fuel฀pump฀dirty.฀Contact฀your฀dealer.

The heater has been in operation

฀continuously฀for฀a฀period฀of฀65฀hours฀

฀and฀has฀turned฀itself฀off฀automatically.฀Switch฀the฀heater฀back฀on.

-- : --

Out of fuel. Refill removable tank.

-- : --

฀Too฀little฀ventilation.฀Ventilate฀better.

e - 1 1

฀Too฀little฀ventilation.฀Ventilate฀better.

Always฀contact฀your฀dealer฀for฀any฀malfunctioning฀not฀listed฀above฀and/or฀when฀

the error keeps occuring after taking the corrective measure as described above.

AUTOMATIC DEACTIVATION

This heater is fitted with a safety system that ensures that it switches off

automatically฀after฀65฀hours฀continuous฀operation.฀The฀following฀will฀then฀appear฀

in the display:

. If desired, you can switch the heater on again by pressing

the

button

(see Section D).

AUTOMATIC CLEANING MODE

When the heater has been burning continuously for two hours at its highest

setting, the burner will automatically start an autoclean procedure. The display

will show the autocleaningcode cl:05 running back to cl:01. The procedure takes 5

minutes, during which the heater will burn at its lowest setting, while the burner

autocleans. When the burner is clean again, the heater will automatically switch

back to the highest setting again.

In case of any

malfunctioning the

information display will

tell you what is the

matter.

Loading ...

Zibro LC 300

User Manual - Page 10