Loading ...
Loading ...
Loading ...
RGBlink vue PTZ camera User Manual
26
network segment according to the revised IP address of the camera.
Note: The IP address to be added cannot be same with that of other computers or devices. The existence
of this IP address needs to be verified before adding
3) Click the “Start” and select “Operation” to input cmd as picture below to verify if the network segment
has been successfully added.
4) User can also to verify network connection as steps above mentioned after the finish of camera self-check.
If IP is default, open DOS command window and input 192.168.5.163,then press Enter key. It will show message
as below: which means network connection is normal.
Loading ...
Loading ...
Loading ...