Loading ...
Loading ...
Loading ...
25
Input Connectors
1 MICROPHONE INPUT. Microphones or other low
levels inputs can be connected to this input.
2 LINE INPUT. This input can be selected in place
of the microphone input. Like the DAW input it is
suitable for high level line sources.
3 MIC/LINE INSERT SEND . This is the insert point
send output for the microphone and line input.
Signal is always present here and can be used
as an additional output. Only the Mic/Line signal
will appear here and it is not aected by the Flip
switch.
4 MIC/LINE INSERT RETURN. When the insert point
is in use the signal from the external processing
equipment should be connected here.
5 DAW INPUT. The output of the DAW should be
connected here although the input is suitable for
any high level line source.
6 DAW INSERT SEND. This is the insert point send
output for the DAW input. Signal is always present
here and this can be used as an additional output.
Only the DAW signal will appear here and it is not
aected by the Flip switch.
7 DAW INSERT RETURN. When the insert point is
in use the signal from the external processing
equipment should be connected here.
The rear mounted connector panel is where the input,
output and insert point connectors are located.
The microphone input uses an XLR connector while
the line input, DAW input and the insert sends and
returns use Tip, Ring and Sleeve jacks.
1
3
2
4
5
7
6
Loading ...
Loading ...
Loading ...