Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
7
Lowes.com/allenandroth
9.
8.
Align holes in fixture (A) with screws (F) on
mounting plate (B) and push fixture (A) toward
wall. Attach fixture (A) to mounting plate (B)
using the decorative nuts (D) previously removed
(Step 3, Page 5).
NOTE: Fixture (A) can be installed with the
sockets facing either up or down.
NOTE: Before tightening decorative nuts (D)
completely, use level (not included) to check
fixture (A); adjust if necessary.
9
Remove socket ring (C) from one of the
sockets. Attach one glass shade (E) to the
socket using socket ring (C).
Repeat for remaining sockets.
CAUTION: Do not overtighten socket
rings (C) as glass may crack or break.
Outlet
Box
D
8
B
A
D
F
F
C
E
7.
Outlet Box
A
AA
AA
Wrap electrical tape (not included) around
each individual wire connector (AA) down
to the wire. Push wire connectors (AA)
gently back into outlet box. Carefully push
excess wiring into outlet box.
WARNING: Make sure no bare wire or
wire strands are visible after making
connections.
AA
7
Loading ...