Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
6
Lowes.com/allenandroth
6.
Prepare wires by stripping 3/4 in. of insulation from
wire ends using wire strippers (not included).
Connect WHITE wire from fixture (A) to WHITE wire
from outlet box using existing wire connector or wire
connector (AA). Connect BLACK wire from fixture (A)
to BLACK wire from outlet box using existing wire
connector or wire connector (AA). Connect
BARE/GREEN ground wire from outlet box to BARE
ground wire from fixture (A) with wire connector (AA).
NOTE: Screw wire connectors (AA) on in a clockwise
direction.
WARNING: Never connect ground wire to
WHITE or BLACK power supply wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA) are
designed to accept only one 12-gauge house wire
and two lead wires from the light fixture. If your
house wire is larger than 12-gauge or there is more
than one house wire to connect to the corresponding
fixture lead wires, consult an electrician for the
proper size wire connectors to use.
Hardware Used
E3 Wire Connector
x 3
AA
AA
AA
A
4
Outlet Box
WHITE
BLACK
BARE/GREEN
6
AA
Temporarily place fixture (A) over mounting plate (B)
to determine amount of adjustment necessary for
screws (F). NOTE: The screws (F) should come
through holes in fixture (A) just enough so decorative
nuts (D) will fit flush against fixture (A) when
mounted.
Once screws (F) are adjusted, use pliers (not
included) to tighten nuts (G) on screws (F) until
nuts (G) touch mounting plate (B).
Set fixture (A) aside.
5.
5
A
Outlet Box
F
B
G
D
Loading ...
Loading ...