Loading ...
Loading ...
Loading ...
4
ENGLISH
Charging Procedure (Fig.B)
IMPORTANT: The battery in your light is not fully charged at
the factory. Before attempting to charge the light, thoroughly
read all of the safety instructions.
• Open the rubber seal
5
to expose the charging port
6
.
• Align the charging cable
7
with the charging port in back
of the light and insert it.
• Plug the charger into wall charger or a port of a charging
device (such as laptop).
• The charging LED
1
will be red while the battery is
charging. The charging LED will turn green when fully
charged.
• The light is not packaged with a full battery charge. Let the
light charge initially for up to 4 hours.
BATTERIES
The product is not fully charged out of the carton. Before using
the product, read the safety instructions below and then follow
the charging proceduresoutlined.
NOTE: If the product is unused for approximately 90 days, fully
charge the battery to help prolong the life of the battery.
Description (Fig.A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Power Button/Toggling LED Light
2
Flood light module
3
Flexible coil
4
Directional light module
5
Rubber seal
6
Charging port
7
Charging cord
8
Date code
Intended Use
Your cordless LED Snake Light® has been designed for
lightingapplications. This unit is for indoor use only
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
withoutsupervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.
Example:
2022XX XX
Year and Week of Manufacture
Date Code Position (Fig.A)
The date code
8
, which also includes the year of manufacture,
is printed into thehousing.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual beforeuse.
Visible radiation. Do not stare intolight.
For household use only
Package Contents
The package contains:
1 Snake Light
1 Charging cable
1 Instruction manual
• Check for damage to the lamp, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Specific Safety Rules for Lights
WARNING: Do not place the light in a position
which may cause anyone to intentionally or
unintentionally stare into the light. Serious eye injury
couldresult.
WARNING: Fire hazard. Do not operate light or charger
near flammable liquids or in gaseous or explosive
atmospheres. Internal sparks may ignite fumes causing
personal injury.
Additional Safety Warnings
a ) This light is intended for residentialuse.
b ) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another batterypack.
c ) Do not use a battery or light that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk
ofinjury.
d ) Do not expose a battery to fire or excessive
temperature. Exposure to fire or temperature above
130°C may causeexplosion.
e ) Have servicing performed by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the product ismaintained.
SAVE THESE INSTRUCTIONS
• potassium hydroxide, gets on the skin (1) wash quickly with
soap and water or (2) neutralize with a mild acid such as
lemon juice or vinegar. If the liquid gets into the eyes, flush
them immediately with clean water for a minimum of 10
minutes. Seek medicalattention.
Loading ...
Loading ...
Loading ...