Loading ...
Loading ...
Loading ...
How to Stop Your Pressure Washer
1. Releasespray gun trigger and let engine idle for two
minutes.
2. Movethrottle to SLOWposition, then STOPposition (A).
1. Slide nozzle backward to achieve high pressure. Slide
nozzleforward when you wish to adjust spray to low
pressure mode.
3. ALWAYS point spray gun in a safe direction and squeeze
spray gun trigger to release retained high water
pressure.
IMPORTANT:Spray gun traps high water pressure, even
when engine is stopped and water is disconnected.
WARHIHG
[he high pressure stream of water that this
_quipment produces can cut through skin and its
,_ underlying tissues, leadingto serious injury and
_ossibleamputation.
Spray gun traps high water pressure, even when
_ngineis stopped and water is disconnected,
which can cause injury.
° Keephighpressurehoseconnectedto pumpandspraygun
whilesystemis pressurized.
° ALWAYSpointspraygunin safedirectionandsqueezespray
guntrigger,to releasehigh pressure,everytimeyou stop
engine.Engagetriggerlockwhennot inuse.
4. Engagetrigger lock on spray gun when not in use.
How To Use the Adjustable Hozzle
You should now know how to STARTand STOPyour
pressure washer. The information in this section will tell you
how to adjust the spray pattern andto apply pressure washer
specific detergents.
WARHIHG
The high pressure stream of water that this
1_ equipment produces can cut through skin and its
underlying tissues, leading to serious injury and
)ossible amputation.
° NEVERadjustspraypatternwhenspraying.
° NEVERputhandsinfrontof nozzleto adjustspraypattern.
Point nozzledown towards a firm surface, disengage
trigger lock, and press trigger to test pattern.
z.
Twisting nozzle adjusts spray pattern from a fan pattern
to a narrow pattern.
UsageTips
For most effective cleaning, keep spray nozzle from 8 to
24 inches away from cleaning surface.
If you get spray nozzletoo close, especially using high
pressure mode,you may damagesurface being cleaned.
DO NOTget closer than 6 inches when cleaning tires.
12
Loading ...
Loading ...
Loading ...