Loading ...
Loading ...
Loading ...
-4-
Safety Rules for Cordless Screwguns
Hold the power tool by insulated
gripping surfaces, when performing an
operation where the fastener may
contact hidden wiring. Fasteners
contacting a live wire may make
exposed metal parts of the power tool
live and could give the operator an
electric shock.
Do not drill, fasten or break into
existing walls or other blind areas
where electrical wiring may exist. If this
situation is unavoidable, disconnect all
fuses or circuit breakers feeding this
worksite.
Always wear safety goggles or eye
protection when using this tool. Dust
and debris may be expelled from the
work piece during normal operation.
Secure the material being fastened.
Never hold it in your hand or across
legs. Unstable support can cause the
accessory to bind causing loss of control
and injury.
Be aware of the location and setting of
the switch "Lock-ON" button. If the
switch is locked "ON" during the use, be
ready for emergency situations to switch
it "OFF", by first pulling the trigger then
immediately releasing it without
pressing the "Lock-ON" button.
Battery tool use and care
Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack.
Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery
terminals together may cause burns or a
fire.
Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
Do not use a battery pack or tool that
is damaged or modified. Damaged or
modified batteries may exhibit
unpredictable behaviour resulting in fire,
explosion or risk of injury.
Do not expose a battery pack or tool to
fire or excessive temperature.
Exposure to fire or temperature above
265 °F (130 °C) may cause explosion.
Follow all charging instructions and do
not charge the battery pack or tool
outside the temperature range
specified in the instructions. Charging
improperly or at temperatures outside
the specified range may damage the
battery and increase the risk of fire.
Service
Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or
authorized service providers.
General Power Tool Safety Warnings
Loading ...
Loading ...
Loading ...