Loading ...
Loading ...
Loading ...
traegergrills.com
|
15
INITIAL FIRING INSTRUCTIONS (cont.)
CONTROL SHUT-DOWN CYCLE
The control for this barbecue comes with an
automatic shut-down cycle. When nished
cooking on your barbecue, press and hold the
Center button for 3 seconds. The display will ash
OFF for several seconds, then scroll COOL Dn followed
by the actual temperature until the grill cools
down to a safe temperature.
While the controller is ashing OFF, you can cancel
the Shutdown Cycle by pressing and holding the
Center button for two seconds.
Always allow the Shutdown Cycle to completely
nish before powering off your grill at the power
switch. The Shutdown Cycle ensures the re is
suppressed and the grill ignites properly on the
next use.
DANGER! Turning off the power switch will cut
power to the grill components only. When servicing
the control or any other parts, ensure that the
power supply is disconnected to avoid an electrical
shock hazard.
SUBSEQUENT START-UP
1
With the Power switch set to ON (I),
press the Center button once to wake
the grill controller. Set the desired
temperature with the UP button.
2
Once the desire temperature is
displayed, press IGNITE. Allow grill to
preheat until desired temperature is
achieved.
NOTE: If the grill fails to achieve
the selected temperature, please see
“Operating Tips” on page 20 for more
information.
NOTES:
• Once you press the IGNITE button, your Traeger
Ranger Grill will always begin with an ignition
and preheat cycle.
• WARNING! When operating this grill, maintain a
minimum clearance of 12 in. / 30.5 cm from grill
to combustibles.
3643 Ranger UCGv02.indd 15 12/4/17 4:44 PM
Loading ...
Loading ...
Loading ...