Loading ...
Loading ...
Loading ...
14
Recommendation: For easy cleanup, line the
grease drip tray with Traeger Aluminum Drip Tray
Liners or heavy-duty aluminum foil. If using foil, be
sure the edges and ends of the foil are tight against
the bottom of the grease drip tray. Replace foil after
each cook to reduce the possibility of a grease re.
Please see “Maintaining Your Grill” on page 22 for
more details.
WARNING!
• When operating this grill, maintain a minimum clearance of 12 in. / 30.5 cm from grill to combustibles.
• For best results and avor, always use genuine Traeger® Hardwood Pellets. Never use heating fuel pellets in
the grill.
• Clean the grease drip tray frequently to reduce the possibility of a grease re. Please see “Maintaining Your
Grill” on page 22 for more details.
INITIAL FIRING INSTRUCTIONS (cont.)
5
Continue priming until a small amount
of pellets are in direct contact with
the hot rod in the re pot. Press and
hold the UP and IGNITE buttons
simultaneously to stop priming and
return the grill to Idle mode.
6
Now you’re ready to place the
grease drip tray and porcelain-coated
grill grates or cast-iron griddle back
into the grill. Place the grease bucket
under the grease drain on the back of
the grill to catch grease drippings.
7
Press the UP button until the
temperature display reads 450°F
(250°C).
NOTE: To change between Celsius (C)
and Fahrenheit (F), press and hold the
UP and DOWN buttons simultaneously.
8
Press the IGNITE button. Let the grill
run at 450°F (250°C) for 30 minutes
with the lid closed to complete the
seasoning process.
3643 Ranger UCGv02.indd 14 12/4/17 4:44 PM
Loading ...
Loading ...
Loading ...