Loading ...
Loading ...
Loading ...
EN - 12 WWW.SENIXTOOLS.COM
– after striking a foreign object;
– whenever the product starts
vibrating abnormally.
e) Ensure that the pole hedge
trimmer is correctly located in
a designated working position
before starting the motor.
f) While operating the pole hedge
trimmer, always ensure that the
operating position is safe and
secure, especially when using
steps or a ladder.
g) Do not operate the pole hedge
trimmer with a damaged or
excessively worn cutting device.
h) Always ensure that all handles
and guards are tted when using
the pole hedge trimmer. Never
attempt to use an incomplete
pole hedge trimmer or one
tted with an unauthorized
modication.
i) Always use two hands to operate
a pole hedge trimmer.
j) Always be aware of your
surroundings and stays alert for
possible hazards of which you
may not be aware due to the
noise of the product.
k) Take care against injury to feet
and hands from the cutting
device.
l) Always ensure that the air vents
are kept clear of debris.
operating the product.
g) If the cutting attachment strikes
any foreign object or the product
starts making any unusual noise
or vibration, switch the product
off, allow the product to stop,
remove the battery, and take the
following steps:
– inspect for damage;
– check for, and tighten, any loose
parts;
– have any damaged parts replaced
or repaired with parts having
equivalent specications.
3) Operation
a) Use the product only in daylight
or good articial light.
b) Keep hands and feet away from
the cutting device at all times
and especially when switching
on the motor.
c) Before using the product and
after any impact, check for signs
of wear or damage and repair as
necessary.
d) Always remove the battery
– whenever leaving the product
unattended;
– adjusting the working position of
the cutting device;
– before clearing a blockage;
– before checking, cleaning or
working on the product;
Loading ...
Loading ...
Loading ...