Loading ...
Loading ...
Loading ...
20
8.6 Open the spark plug cover on the engine.
8.7 Remove the spark plug HT lead cap and using a spark plug spanner, undo and remove
the spark plug.
8.8 Remove the spark plug and inspect the plug and the plug washer.
8.9 If any wear or damage is visible, the spark plug or spark plug washer must be replaced.
8.10 Remove carbon deposits from the spark plug by using a soft wire brush.
8.11 The spark plug gap should be 0.7 – 0.8mm (0.028” – 0.031”).
Check the spark plug gap using a feeler gauge and adjust as necessary by carefully
bending the side electrode to achieve the correct gap.
SPARK PLUG
Loading ...
Loading ...
Loading ...