Loading ...
Loading ...
Loading ...
Recording Your Current
Location (TIME & PLACE)
While traveling or otherwise on the go, you can
use the procedure below to record your
current location, along with the time and date,
on your phone. Recorded location information
can be viewed on a BABY-G Connected map
while the watch is connected with your phone.
●
Recording Your Current Location
1.
X
Enter the Timekeeping Mode.
l
Navigating Between Modes
2.
X
When you are in the location you want
to record, press (D).
This records, in phone memory, the
latitude and longitude of the location you
are in when you press the button, along
with the date and time.
●
Viewing a Recorded Location on a Map
1.
Y
Tap the “BABY-G Connected” icon.
2.
X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and
e
start to flash.
When a connection is established
between the watch and phone, [CNCT]
and
e
will stop flashing and remain on the
display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
ConnectedTrying to connect
3.
Y
Perform the operation shown on the
phone screen to view recorded location
information.
Note
●
You can use BABY-G Connected to
delete recorded location information.
Connection
Connecting with a Phone
Your watch can connect with a phone that is
paired with it.
●
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l
C
Pair the watch with a phone.
●
Connecting with a Phone
1. Move the phone close to (within one meter
of) the watch.
2.
X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and
e
start to flash.
When a connection is established
between the watch and phone, [CNCT]
and
e
will stop flashing and remain on the
display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
ConnectedTrying to connect
Important!
●
If you have problems establishing a
connection, it could mean that BABY-
G Connected is not running on your
phone. On your phone’s home screen,
tap the “BABY-G Connected” icon.
After the app starts up, hold down the
watch’s (C) button for at least three
seconds.
Note
●
The connection will be terminated if
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
BABY-G Connected: “Watch settings”
n
“Connection time”. Next, select a
setting of 3 minutes, 5 minutes, or 10
minutes.
Disconnecting from Your Phone
Pressing any button will terminate a Bluetooth
connection and return to the Timekeeping
Mode.
DisconnectedConnected
Unpairing
Unpairing the watch from a phone requires
both BABY-G Connected and watch
operations.
●
Deleting Pairing Information from
BABY-G Connected
1.
Y
Tap the “BABY-G Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to unpair.
Watch Operation Guide 5659
14
Loading ...
Loading ...
Loading ...