Loading ...
Loading ...
Loading ...
Installation Instructions
UTILITY CLOSET CONNECTION LOCATIONS
IMPORTANT: Plan and locate plenum, wall plug, drains and
thermostat carefully to avoid interference. Hard-to-reach locations
will make installation and service difficul!!
Use rigid duct for
90° bends and tees
Flex duct may be used
for transitions only
Outside wall
D
230/208 VAC
wall receptacle F
or G
conduit
for direct
connection
Reference Dimensions
A Thermostat cable: 9½" long
B Power cord: 60" long
C Case width and depth: 23½"
D Case height: 31"
E Condensate drains: 3/4" connector
, Primary Drain - Centerline of cutout is
approximately 51A''from left case wall
and 8½" from back case wall.
, Secondary Drain - Centerline of cutout is
approximately 61/2"from left case wall
and 5¼" from back case wall.
Typical wall plug: 6"-12" above case
Room air sensor kit: 10' long
Platform
16
Loading ...
Loading ...
Loading ...