Loading ...
Loading ...
Loading ...
first time en
15
5.7 Safety systems
You can find an overview of your ap-
pliance's safety systems here.
Start lock-out
Start lock-out prevents your appli-
ance from being switched on acci-
dentally.
The appliance can only be switched
on and operated if the swivel arm
has engaged correctly in position 1
or position 3.
Restart lock-out
Restart lock-out prevents your appli-
ance from automatically restarting
processing after a power failure.
The appliance is switched on again
after a power failure. Processing can-
not start again until the rotary switch
has been set to
.
Overload protection
The overload protection system pre-
vents the motor and other compon-
ents from being damaged through
being overloaded.
first time
6 Before using for the
first time
first time
Prepare the appliance for use.
6.1 Preparing the appliance
1. Press the release button and raise
the swivel arm until it engages.
→"Moving the swivel arm",
Page15
2. Lift and remove the bowl.
→"Removing bowl", Page15
3. Clean all parts that come into con-
tact with food before using for the
first time.
→"Cleaning and servicing",
Page17
4. Put the cleaned and dried parts
out ready for use.
operation
7 Basic operation
operation
7.1 Cable length
Adjust the length of the power cable
to your needs.
Adjusting cable length via cable
storage compartment
1. Pull the power cable out to the re-
quired length.
2. To shorten the cable, push it into
the cable storage compartment.
7.2 Moving the swivel arm
1. Press the release button and raise
the swivel arm until it engages.
→Fig.
3
a The swivel arm is fixed in posi-
tion2.
2. Press the release button and move
the swivel arm down until it en-
gages in the vertical position.
→Fig.
4
a The swivel arm is fixed in posi-
tion3.
7.3 Inserting bowl
▶ Place the bowl in the base unit.
→Fig.
5
The bowl must be positioned
straight and firm on the base unit.
7.4 Removing bowl
▶ Lift and remove the bowl.
→Fig.
6
7.5 Inserting tools
Loading ...
Loading ...
Loading ...