Harbor Breeze AK52BNK4L Aikman 52-in Brushed Nickel LED Indoor/Outdoor Ceiling Fan

Installation Guide - Page 6

For AK52BNK4L. Also, The document are for others Harbor Breeze models: AK52EB4L

PDF File Manual, 9 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
page 5
5. Fan Assembly. (cont.)
With the hanging bracket secured to the
outlet box and able to support the fan, you
are now ready to hang your fan. Grab the fan
firmly with two hands. Slide downrod through
opening in hanging bracket and let hanging
ball rest on the hanging bracket. Turn the
hanging ball slot until it lines up with the
hanging bracket tab.
WARNING: Failure to align slot in hanging ball
with tab in hanging bracket may result in
serious injury or death.
Tip: Seek the help of another person to hold
the stepladder in place and to help lift the fan
up to you once you are set on the ladder.
* Wrap each wire connector separately with
electrical tape as an extra safety measure.
hanging ball slot
hanging bracket tab
motor housing
6. Wiring.
WARNING: Turn off circuit breakers to current
fixture from breaker panel and be sure switch is
turned to the OFF position.
CAUTION: Be sure outlet box is properly grounded
and that a ground wire (GREEN or Bare) is present.
Make sure all electrical connections comply with
Local Codes or Ordinances and the National
Electrical Code. If you are unfamiliar with electrical
wiring or if the house/building wires are different
colors than those referred to below, please use a
qualified electrician.
Note: Excess lead wire length from the fan can be
cut to the desired length and then stripped.
When downrod is secured in place on the
hanging bracket, electrical wiring can be made
as follows:
Connect BLACK and BLUE wire from fan to
BLACK wire from ceiling with wire connector
provided.
Connect WHITE wire from fan to WHITE wire
from ceiling with wire connector provided.
Connect all GROUND (GREEN) wires together
from fan to BARE/GREEN wire from ceiling with
wire connector provided.
If you intend to control the fan light with a
separate light switch, connect BLUE wire from
fan to the BLACK (or RED) supply from the
independent switch.
This fan is remote control adaptable (remote
control sold separately). Note: Only remote
controls approved for DAMP location can
be used with this fan.
black
black
white
white
black supply wire
white supply wire
from
ceiling
from fan
ground
(green or bare)
ground
(green
or bare)
blue
Loading ...
Loading ...
Loading ...