Loading ...
Loading ...
Loading ...
www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
42
6. INSTALLATION: BOTTOM COMPRESSOR MODELS
Distance between units (A+B)
C
A
18” 24” 30” 36”
B
18” 7/8” (22 mm) 15/16” (23.5 mm) 1” (24.5 mm) 1” (25.5 mm)
24” 15/16” (23.5 mm) 1” (25 mm) 1” (26 mm) 1 1/16” (27 mm)
30” 1” (24.5 mm) 1” (26 mm) 1 1/16” (27 mm) 1 1/8” (28 mm)
36” 1” (25.5 mm) 1 1/16” (27 mm) 1 1/8” (28 mm) 1 1/8” (29 mm)
Once the appliances have been adjusted and properly leveled, loosen the two screws holding the sealing plate
in position.
Lower the plate until flush with the floor, and re-tighten the screws. This will ensure optimization of the
airflow through the condenser, which is necessary for proper operation.
This table is a reference for the required space at the back of the units between the appliance bodies when
installing the metal brackets from the joining kit. This space between the bodies will occur naturally when
connecting the units at the front using the supplied plastic mounting brackets. The table is a tool to help you
ensure that the space between the units is consistent from front to back. Example of why this is important:
if the space at the back between the units is wider than the space at the front, the drawers may collide with
each other when fully opened.
> Next, join them at the front by attaching the plastic
connecting brackets with the supplied screws [ 3 ].
We recommend suing two screws for connecting
each bracket; one from each side [ 4 ].
3
4
Loading ...
Loading ...
Loading ...