Loading ...
Loading ...
Loading ...
DJI Mini 3
User Manual
20
©
2022 DJI All Rights Reserved.
3. Choose a shooting mode, select your target subject in the camera view by tapping the circle
on the subject or dragging a box around the subject, and tap Start to begin recording (It is
recommended to choose a human as a target subject rather than a building). The aircraft
will fly back to its original positon once shooting is finished.
4. Tap
to access the short video or the original video. You can edit the video or share to
social media after downloading.
Exiting QuickShots
Press the Flight Pause/RTH button once or tap in DJI Fly to exit QuickShots. The aircraft will
hover in place.
If you accidentally move a control stick, the aircraft will exit QuickShots and hover in place as
well.
•
Use QuickShots at locations that are clear of buildings and other obstacles. Make sure
that there are no humans, animals, or other obstacles on the flight path.
•
Pay attention to objects around the aircraft and use the remote controller to avoid
collisions with the aircraft.
•
DO NOT use QuickShots in any of the following situations:
a) When the subject is blocked for an extended period or outside the line of sight.
b) When the subject is more than 50 m away from the aircraft.
c) When the subject is similar in color or pattern with the surroundings.
d) When the subject is in the air.
e) When the subject is moving fast.
f) When the lighting is extremely low (<300 lux) or high (>10,000 lux).
•
DO NOT use QuickShots in places that are close to buildings or where the GNSS signal
is weak. Otherwise, the flight path will be unstable.
•
Make sure to follow local privacy laws and regulations when using QuickShots.
Flight Recorder
Flight data including flight telemetry, aircraft status information, and other parameters are
automatically saved to the internal data recorder of the aircraft. The data can be accessed using
DJI Assistant 2 (Consumer Drones Series).
Propellers
There are two types of propellers, which are designed to spin in different directions. Marks are
used to indicate which propellers should be attached to which motors. The two blades attached
to one motor are the same.
Propellers Marked Unmarked
Illustration
Mounting Position
Attach to the motors of the
marked arm
Attach to the motors of the
unmarked arm
Loading ...
Loading ...
Loading ...