Loading ...
Loading ...
Loading ...
Unlocking programs temporarily
1. If you try to watch aTV program that exceeds tile rating limits
¢ou set, the TV will enter into the program lock mode.
THIS PROGRAM HAS BEEN BLOCKED!
TV PG L V
EXCEEDS SET LIMITS
PUSH MUTE TO ENTER PIN
CABLE 4
2. If you want to watch the locked program temporarily, press
MUTE.
3. Press the Channel Number buttons (0-9) to enter the 4-digit
PIN code you stored (see "Entering the PIN code" on page 28).
BLOCK I NG ACTIVE
ENTER PIN CODE
TO TEMPORAR I LY UN BLOCK
0-9:TO SELECT ENTER:TO SET
4. Press ENTER.
If the correct code is entered, the lock mode will be released and
the normal picture will appear.
All locking is disabled until the TV is turned off, and will be
enabled the next time the TV is turned on.
If the wrong PIN code is entered, the message "Incorrect PIN
code" appears. Enter the code again.
Locking channels
With tile CH LOCK feature, you can lock specific channels. You will
not be able to tune locked channels using the Channel AV or
Channel Number buttons unless you clear the setting.
You can lock a maximum of 8 channels.
Note: TheCH LOCKfeatureis not affectedby the ENABLEBLOCKING
setting(page29).
To lock channels:
1. From the LOCKS menu, select CH LOCK.
2. Press • or • to display the CH LOCK menu.
3. Press the Channel Number buttons to enter the channel you
want to lock.
Note: Youcannotlock thecurrent channel.
4. Press ENTER.
O LOCKS
V CHIP
ENABLE BLOCKING OFF
TV RATING
MPAA RATING
FRONT PANEL LOCK 0 0 0 0
NEW PIN CODE TV CABLE
CLEAR ALL
LOCKS
V-CHIP
ENABLE BLOCKING OFF
TV RAT I NG )'
MPAA RATI NG I,
,,)
CLEAR ALL )'
5. Repeat steps 3 and 4 for other channels.
(Continued on next ])age)
LOCKS menu
®®0®@®
LOCKS
V CHIP
ENABLE BLOCKING ON
TV RATING
MP_ RATING
FRONT PANEL LOCK OFF
NEW PIN CODE )'
To select each item:
Press V or •.
31
Loading ...
Loading ...
Loading ...