Loading ...
201006016 93-2926
Method 2
Note: PDUSIDEBRKT must be installed
before equipment is installed in
the rack.
Step 1. Attach the two mounting brackets
to both ends of the PDU using the
four included #6-32 screws.
Step 2. Slide the brackets’ flanges behind
the outer portion of the mounting
rail as seen in the diagram.
Step 3. Attach the brackets to the rack’s
mounting rails using the four
included 6 mm screws and M6
washers.
Step 1. Step 2. Step 3.
Note: Smaller and larger
screwdriver clearance
holes will alternate on each
edge of the bracket and are
transposed on the bracket’s
other edge. Insert the
screwdriver into the larger
clearance holes on one
edge to attach the screws
into the smaller holes on
the bracket’s other edge.
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support