Loading ...
Loading ...
Loading ...
Setting for Best Results
Upper oven racks
Removing and replacing the offset rack
(not illustrated)
• To remove pull the oven rack straight forward
until it reaches the stop position. Lift up front of
oven rack slightly and slide out.
• To replace, fit the oven rack onto the rack
guides on the oven walls. Tilt the front of the
rack upward slightly and slide the oven rack
completely back into place (not shown).
Removing and replacing the
Luxury=Glide TM oven racks
• To remove use thumbs to press in on both left
and right spring-loaded release levers -Fig. 1-.
Place the remainder of both hands over the
upper front of the glide rack. While pressing in
on both levers, pull the rack straight out slightly
and release thumb levers. Using both hands
grasp both the upper and lower portions of
the glide rack (-Fig. 1); pull rack using both
hands straight out until reaching the stop
position -Fig 2-. At the stop, lift up front of rack
slightly and continue to pull rack away from
oven -Fig 3-. Be sure to hold on both upper and
lower rack portions when removing from or
handling rack outside of the the oven - these
rack portions move independently and are
difficult to handle unless held together.
• To replace, grasping both upper and lower
portions of glide rack, lift and place the rack
resting evenly between the oven cavity walls.
Tilt the front of the rack upward slightly and
slide the rack completely into position. Some
force may be necessary to make sure the oven
rack has snapped completely back into place.
extendable glide rack
Fig. 1
ck
/_ \ portion
lower rack
portion
Fig. 2
Fig. 3
Loading ...
Loading ...
Loading ...