Loading ...
Loading ...
Loading ...
NSTALLATION INSTRUCTIONS
Safety recommendations forinstallation
Take all possible precautions to allow the pump to be installed in a safe,
risk-free manner.
All installation phases must be taken into consideration when designing the
machinery or plant in which the pump is to be installed.
The design must consider all mounting points, the means of transmission
of the energy sources, and the protective and safety devices required by
the relevant regulations to prevent the risk of injury.
Installation
The mechanical connection between the pump and the motive power
source may be made by means of a pulley and belt, or a flexible coupling,
or through a direct flanged connection to the motive power source.
The crankshaft may turn in either direction.
The water supply connection can be made equally well to the intakes on
the right or left of the pump(see diagram). Only connect the pump to
filtered, clean water sources.
Unscrew the plugs fitted on the various ports in the factory by the
manufacturer, and screw the plugs onto the ports not used, depending on
connection requirements.
Replace the oil plug (A), used for shipment with the breather plug
(B)supplied.
Loading ...
Loading ...
Loading ...