Loading ...
Loading ...
Loading ...
PAGE: 8 / 11
Fig.17
19
20
Note: Remote controller can not be used along with a solid-state speed control at the same time.
Fig.19
Fig.20
Transmitter
Wall Bracket
Screw
8
Install the battery (9V, included) into the transmitter.
* Press "HI" button to turn on the fan at high speed.
* Press "MED" button to turn the fan in medium speed.
* Press "LOW" button to turn the fan in low speed.
* Press "FAN OFF" button to turn off the fan.
* Press "LIGHT ON/OFF" button to turn on or turn off the light.
* Press and hold the "DIMMER" button to dim or brighten lights to the desired level and
release, and the brightness level will be memorized. Turn on the light again, then fan light
will be restored to the brightness-level at which it was dimmed last time.
Note:
1. This remote controller has a memory function setting. The fan will operate at the same
speed and the fan light will stay at the same brightness-level as the last time the power
supply was turned off.
2. Compatible Wall Switches: Menards SKU# 363-2615 / 363-5815.
3. Compatible with E12 (C) base dimmable LED bulb: Menards SKU# 353-8305.
Install the transmitter wall bracket on the wall with two screws and place transmitter in it carefully.
220104
Loading ...
Loading ...
Loading ...