Loading ...
Loading ...
Loading ...
ORIGIN User Guide
Appendix A
38
Range Routing 2 - more buses from more channels with less switch presses!
In the previous example, instead of pressing multiple Channel ROUTE switches for channels 1 to 4 it is possible just to
simultaneously press Channel ROUTE switches 1 and 4 to route to a range of Channels simultaneously.
Similarly to route to a range of Track Buses from multiple Channels it is possible to use a Range Selection of both Track Bus
switches and Channel ROUTE switches.
Looking at the drum submix again, but this time starting from Track Buses 1 and 2. As a reminder the task is to route a range of
Channels to a pair of Track Buses to make a Drum stem, or submix from eight channels of drum mic's on Channels 1 to 8 mixed
to Track Buses 1 and 2, this time starting from the Track Buses. Start by pressing Track Bus switches 1 and 2 simultaneously, this
puts Track Buses 1 and 2 into Select Mode and the corresponding blue Track Bus LEDs ashing. Now use a range of Channel
ROUTE switches on channels 1 to 8 by simultaneously pressing the ROUTE switches on Channel 1 and Channel 8. All eight
Channels (i.e. 1 TO 8) will be routed to Track Buses 1 and 2. To return to Idle Mode (dimmed LEDs) from Select Mode(ashing
and bright LEDs) you can now press the Range Selection of Track Buses 1 and 2 again, or more simply press the Master Section
SHIFT switch to escape from Range Selection mode.
Interrogating Routing - Finding Out What Is Routed Where?
Finding out what signals are routed where is a simple switch press away!
Where Is This Channel Routed?
If a Channel ROUTED TO BUS LED is dimly illuminated
in Idle Mode (normal operating mode) then it means that
Channel is routed to a Track Bus. To nd out which
Track Bus it is routed to press the channel's ROUTE
switch. This will brightly illuminate the Track Bus routing
LEDs in the Master Section, showing which Track Buses the Channel is routed
to. Press the selected ROUTE switch again to escape Select Mode.
What Is Routed To This Track Bus?
If a Track Bus LED is dimly illuminated in Idle Mode
(normal operating mode) then it means that a Channel
or Channels is/are routed to that Track Bus. To nd
out which Channels are routed to it press the Track
Bus switch. This will brightly illuminate the Channel
ROUTED TO BUS LEDs in the Channels, showing which Channels are routed
to that Track Bus.
Clearing Routes Quickly - the SHIFT switch
The SHIFT switch in the MISC section of the Master Section can be used to quickly
clear routing. Pressing and holding the SHIFT switch puts the switch into CLEAR
ROUTE mode. With the SHIFT switch held down the next press of either a Channel
ROUTE switch or Track Bus switch will clear any/all routing from that Channel or to
that Track Bus respectively.
Loading ...
Loading ...
Loading ...